concreteslabcost.comSourced Cost Model · Oct 2026
12 x 20 · 240 Sq FtUpdated November 2026
Size Series

12x20 Concrete Slab Cost: $1,490 to $4,160 (2026)

A 12x20 concrete slab costs about $2,370 installed at 4 inches thick with wire mesh, on a 4-inch crushed-stone base with a broom finish: $1,490 to $4,160 from the lowest published prices to the highest ($6.20 to $17.32 per sq ft). Built as a one-car garage floor (6 inches, 4,000 PSI, rebar) it is about $3,070. These are our model figures, built from ready-mix, stone and materials prices read in October 2026 and BLS wages; the method is at the foot of the page.

12x20 Cost Ticket · 240 Sq Ft
4" with mesh
$2,370
$1,490 to $4,160
4" plain
$2,210
$1,380 to $3,930
6" garage
$3,070
$2,020 to $5,250
Concrete (4")
2.96 yd
134 bags of 80 lb

Check a quote for a 12 x 20 slab

Set to a 12 x 20 ft, 4-inch slab with wire mesh. If the slab is a garage or carport floor, set 6 inches and rebar before you compare.
Is this a quote or the final bill?

The slab on the quote

240 sq ft, 2.96 cu yd of concrete before waste

Does the price include…

Breaking out and removing an old slab?
Digging out and hauling away soil?
A concrete pump (truck cannot reach)?
A building permit?

Choose your state and enter the price to place your quote against the range below and against other readers’ quotes.

Our range for this slab: $1,490 to $5,950

  • Slab: 4 inches, 3,000 PSI, wire mesh, plain broom, on a 4-inch crushed-stone base$1,490 to $4,160
  • Break out and remove an old slab (not sure: top of the range only)+$0 to $730
  • Dig out and load soil for haul-off (not sure: top of the range only)+$0 to $720
  • Concrete pump (not sure: top of the range only)+$0 to $340
  • Building permit (fees are set by your city or county)not priced

Crew priced at national BLS wages until you choose a state. Concrete, stone and steel at published national prices. Removal from eight contractors’ bids to the Village of River Forest, IL (Dec 2025), which are municipal unit prices without a small-job minimum, so one homeowner job often prices above them. Pump at Supreme Concrete’s published rate (Los Angeles). Dig-out excludes landfill fees and trucking. Every source and date.

Quotes from other readers

How this works

Choose your state above to see what other readers there were quoted for a slab like yours.

Reader figures are volunteered and unverified. People who think a quote is unusual may be more likely to share it, so read them beside our range, not instead of it.

Choose your state and enter the price to add your quote for other readers.

How the quote check works: what your price is compared with, when reader quotes show, what we refuse and hold, and how this site makes money.

Section 01 / By Thickness

12x20 Concrete Slab Cost by Thickness

Thickness sets the concrete volume, and the steel that goes with it sets most of the rest. The same model prices each row: published ready-mix and stone prices, Menards steel and lumber, crew hours at Bureau of Labor Statistics wages, and a stated overhead and margin.

12x20 slabConcreteInstalled cost
4-inch, no reinforcement
3,000 PSI, broom finish
2.96 yd
134 bags
$2,210
$1,380 to $3,930
$9.21 per sq ft
4-inch, wire mesh
3,000 PSI, 6x6 mesh
2.96 yd
134 bags
$2,370
$1,490 to $4,160
$9.88 per sq ft
5-inch, rebar
4,000 PSI, #4 bar at 18 in
3.7 yd
167 bags
$2,930
$1,900 to $4,940
$12.23 per sq ft
6-inch, rebar
4,000 PSI, #4 bar at 18 in
4.44 yd
200 bags
$3,070
$2,020 to $5,250
$12.81 per sq ft

Installed cost is the typical figure, then low to high. All rows: broom finish, 4-inch compacted crushed-stone base, national prices, no excavation. Bags are 80 lb at QUIKRETE’s stated 0.60 cubic feet each, before overage. Low uses the lowest published price and our lowest labour assumption at every step; high uses the highest.

More on each: 4-inch slab cost and 6-inch slab cost.

Section 02 / Which 12x20

Which 12x20 Slab Do You Need?

A 12x20 footprint is used for patios, sheds, a parking space and small garages. What it has to carry decides the spec, and the spec decides the price. A quote for a 12x20 slab should name its thickness, PSI and reinforcement. If yours does not, ask, because two quotes for different specs cannot be compared.

UseUsual specTypical
Patio
Carries people and furniture, not vehicles. IRC R506.1 sets 3.5 inches as the minimum for a floor slab.
Concrete patio cost
4-inch, wire mesh$2,370
Shed or workshop floor
Same spec as a patio. An unheated accessory building is exempt from the IRC R506.2.3 vapor retarder.
Shed slab cost
4-inch, wire mesh$2,370
Parking pad for one car
The 4,000 PSI mix our driveway pages price for slabs that cars drive on.
Driveway cost
4-inch, 4,000 PSI, mesh$2,400
Parking pad, heavier vehicle
More concrete and a rebar grid for a truck or a pad that takes loads near its edges.
Driveway cost
5-inch, 4,000 PSI, rebar$2,930
One-car garage or carport floor
The usual spec for a slab that carries a car every day. A garage floor is part of the building, which needs a permit (IRC R105.1); the kit or plans set any thickened edge.
Garage slab cost
6-inch, 4,000 PSI, rebar$3,070

The International Residential Code does not require reinforcement in a slab on the ground (R506.2.4 only says how steel must be supported where it is used), so mesh and rebar are design choices. Local codes, your engineer or a shed or garage kit’s drawings can require more.

Section 03 / Your Numbers

Price Your 12x20 Slab

Enter 12 and 20 (or your exact size), then open the options to change the thickness, reinforcement and state. The calculator runs the same model as the tables, with your state’s BLS wages for the crew.

Concrete Slab Cost Calculator

Section 04 / Small-Load Charges

Why a 12x20 Pour Pays a Short-Load Fee

A 4-inch 12x20 slab is 2.96 cubic yards, so with overage the order is about 3.11 to 3.26 yards. Gehring (Columbus, Nebraska) adds $50 to loads under 4 yards, and Scenic City Ready Mix (Tennessee) adds $100 at 5 yards or less, so the 4-inch order falls under both. At 6 inches the order is about 4.66 to 4.88 yards, which clears Gehring's line but not Scenic City's. In our model the ready-mix and truck charges for the 4-inch slab come to $445 to $1,057.

Bags or ready-mix. The same 4-inch slab is 134 bags of 80 lb mix. At $9.99 a bag (one Ace Hardware store, 13 October 2026) that is about $1,339 in bags, each one mixed and placed by hand. See the DIY slab guide and the tool rental rates before taking it on yourself.

Removing an old 12x20 slab. Eight contractors bid $1.00 to $3.05 a sq ft to remove concrete in the Village of River Forest, Illinois bid tabulation (December 2025): $240 to $732 for 240 sq ft, on top of the new slab. Those are unit prices on a large municipal program, so one small job can cost more. The removal and replacement page prices the two together.

Digging out. The prices above assume the ground only needs its stone base. Cutting a level pad out of soil, and hauling that soil away, is quoted separately; the site prep page models it from published rental rates and landfill fees.

Method / How We Price

How We Price a Slab

Every installed price on this site comes from one model: published ready-mix and materials prices, plus crew hours priced at Bureau of Labor Statistics wages, plus overhead and margin. The low figure uses the lowest published input and our lowest assumption at every step; the high figure uses the highest. The crew hours, overage and margin are our own estimates, not published figures, and are listed below so you can check them against your quote. Worked example: a 12 x 20 ft slab, 4-inch with wire mesh (4-inch, 3,000 PSI, wire mesh, broom finish, 4-inch stone base).

LineLowTypicalHighBasis
Ready-mix concrete$395$452$5382.96 cu yd plus 5 to 10% overage, at published per-yard prices
Delivery and small-load charges$50$110$519Per-truck charges from the same price lists (10 yd per truck)
Crushed-stone base$156$195$2664 in compacted crusher run
Reinforcement$58$58$586x6 10-gauge mesh panels, lapped
Form lumber$24$36$49Perimeter boards, shared across reuses
Crew labour$557$972$1,541Crew hours x BLS wages x employer costs
Overhead and margin$248$547$1,18820% to 40% on direct cost
Installed total$1,490$2,370$4,160Rounded to the nearest $10

Not included: excavation and soil haul-off, removing an old slab, permits, pumping, decorative finishes and sealing. Totals are national; the calculators’ state option swaps in that state’s BLS wages and leaves concrete and materials at the published lists.

Published inputs (read 13 October 2026)

Our assumptions (estimates, not published figures)

  • Crew: half cement masons, half laborers.
  • Setup per job: 8 to 16 crew hours (layout, stripping, cleanup).
  • Per 100 sq ft: 4-inch 4 to 7 crew hours, 6-inch 5 to 8.5, 8-inch 6 to 10; add 0.5 to 1 for mesh or 1.5 to 2.5 for rebar.
  • Concrete overage 5% to 10%; base stone ordered at 1.2x its compacted volume; form boards charged at half to all of their price.
  • Overhead and margin 20% to 40% of direct cost.
  • 6-inch and thicker slabs use 4,000 PSI mix; thinner slabs 3,000 PSI.

Sources: BLS OEWS 47-2051 cement masons (May 2025), BLS OEWS 47-2061 construction laborers (May 2025), BLS ECEC, construction (June 2026), ready-mix price lists from Supreme Concrete, Minimix Concrete, Gehring Construction & Ready-Mix, Scenic City Ready Mix, crusher-run prices from D & L Supply, JMJ Companies, Golden Landscaping Supply, Yard Works Landscape Supply, Menards mesh, rebar and lumber prices, QUIKRETE Concrete Mix data sheet (bag yield), Village of River Forest 2026 curb and sidewalk bid tabulation, IRC R105.1, R506.1, R506.2.3 and R506.2.4. Model inputs read 13 to 14 October 2026. Crew hours, overage, overhead and margin are our estimates and are listed in the method above.

FAQ

Frequently Asked

About $2,370 installed for a 12x20 slab 4 inches thick with wire mesh, 3,000 PSI concrete, a 4-inch crushed-stone base and a broom finish, in our model built from prices read in October 2026. From the lowest published prices and our low labour assumptions to the highest, it is $1,490 to $4,160, or $6.20 to $17.32 per sq ft. Without mesh it is about $2,210; at 6 inches with 4,000 PSI concrete and a rebar grid, the usual garage spec, about $3,070.
Related

Related Pages

Reader Questions

Didn't find your answer?

Ask us. A real person reads every question and we answer the ones we can, with sources. If your question would help other readers, we may publish an anonymised version, with your permission. General reference only.

Ask a question[email protected]